Maretron’s Fluid Pressure Monitor is used to adapt up to six pressure transducers to the NMEA 2000® network (pressure transducers sold separately). This allows you to observe fluid pressures and tank levels anywhere on the vessel where there are NMEA 2000® compatible displays. With the appropriate transducer the Pressure Transducer Monitor reports either pressure or vacuum for a variety of applications including water pressures oil pressures hydraulic pressures or system vacuum for detecting clogged filters. The Pressure Transducer Monitor also has a tank level mode so that fluid levels in a tank can be monitored via a pressure transducer mounted at the bottom of the tank and transmitted over the NMEA 2000® network. This allows you to monitor the fluid levels in tanks that are extremely deep have internal structures or are otherwise not suited for other tank level sensing technologies. In this mode the Pressure Transducer Monitor can be calibrated for irregular tank shapes so that you know the true level of the tanks. The Maretron Pressure Transducer Monitor is designed to operate within the harsh demands of the marine environment. However no piece of marine electronic equipment can function properly unless installed calibrated and maintained in the correct manner. Please read carefully and follow these instructions for installation calibration and usage of the Maretron Pressure Transducer Monitor in order to ensure optimal performance. Pressure Transducer Monitor NMEA 2000® Interface Adapts Up To Six Pressure Transducers To The NMEA 2000 Network Each Channel Independently Programmable To Match Pressure Transducer Characteristics Each Channel Independently Programmable To Pressure/Vacuum Mode Or Tank Level Mode In Tank Level Mode Measures Levels Of Extremely Deep Or Irregularly Shaped Tanks